Serial console

Serial Connector for WGT634U

Tools:

• Torxschraubendreher/screwdriver T 8
  
• Knipex, or any other wire cutting pliers
  
• Lötkolben/soldering iron
  
• Schrumpfschlauch/shrinkable tubing
  

Shopping list:

- BL 1X20W 2,54 - 20pol. Buchsenleiste, gewinkelt, RM 2,54 (-> www.reichelt.de) or
- BL 1X10G 2,54 - 10pol. Buchsenleiste, gerade, RM 2,54 (-> www.reichelt.de)

(you need only four pins -> Knipex, one side marked with soldering iron)


- DATENKABEL S25 - für alle Siemens C/M/S 25/35/45 (contains level converter (Pegelwandler) (5V->3.3V))


To do list

- You have to open the mobile phone side plug.

before:


after (red cable is not connected, colouring can differ):


- Remove the plug and remember the colour mapping. Look here for details pin mapping (DATA OUT=TX, DATA IN=RX)

1 = GND, 5 = DATA OUT, 6 = DATA IN



- Solder the cables to the appropriate pins of the socket board and use the shrinkable tubing as insulation

- Connect your customized cable to the WGT