Wireless Devices:FritzBox3070: Difference between revisions
Jump to navigation
Jump to search
(→Chips) |
|||
| Line 43: | Line 43: | ||
WiFi Card: [http://www.ti.com/litv/pdf/splt139a Texas Instruments TNETW1130 (aka ACX111)] in MiniPCI-like slot |
WiFi Card: [http://www.ti.com/litv/pdf/splt139a Texas Instruments TNETW1130 (aka ACX111)] in MiniPCI-like slot |
||
The 3.3 Volt pin is the one next to the Atheros miniPCI card. Speed is 38400 bits per second. |
|||
= Changing the Firmware = |
= Changing the Firmware = |
||
Revision as of 08:57, 7 March 2007
Hardware Interfaces
- Back
- RJ-11 socket DSL
- USB-B socket
- 4 RJ-54 sockets (Ethernet 10/100 Base-T)
- USB-A socket
- Power button
- Power socket
- WLAN button
- Front
- 5 diodes: "Power", "LAN", "WLAN", "DSL", "INFO"
Serial Port
- VCC (3.3V)
- RX
- TX
- GND
Chips
The enclosure can be opened by pressing the brackets with a slotted screwdriver towards the device.
Broadband Chip: TNETD7300A7DW (aka AR7)
Switch Controller: Infineon ADM6996L
Ethernet Pulse Transformer: UE40ST1041AX-U LF
VLYNQ to USB Bridge: TNETV115PAP
Flash Memory: MX29LV320C (4 MByte)
SDRAM Memory: Qimonda/Infineon HYB39SC256160FE-7 (32 MByte)
WiFi Card: Texas Instruments TNETW1130 (aka ACX111) in MiniPCI-like slot
Changing the Firmware
The development branch of OpenWRT experimentally supports AR7 devices. OpenWRT has been successfully installed on a Fritz!Box SL. The 3070 might require a different flash memory layout.
Changing the memory layout
Original memory layout:
| mtd0 | 0x90000000 | 0x90000000 |
| mtd1 | 0x90010000 | 0x903c0000 |
| mtd2 | 0x90000000 | 0x90010000 |
| mtd3 | 0x903c0000 | 0x903e0000 |
| mtd4 | 0x903e0000 | 0x90400000 |
Links
Fritz!Box Wiki
OpenWRT auf Fritz!Box SL
AR7-Port von OpenWRT
OpenWRT auf Fritz!Box Fon
Speicherlayout Fritz!Box