Latest revision as of 08:58, 7 March 2007

Hardware Interfaces

The 3.3 Volt pin is the one next to the Atheros miniPCI card. Speed is 38400 bits per second.

The enclosure can be opened by pressing the brackets with a slotted screwdriver towards the device.

Switch Controller: Infineon ADM6996L

Ethernet Pulse Transformer: UE40ST1041AX-U LF

VLYNQ to USB Bridge: TNETV115PAP

Flash Memory: MX29LV320C (4 MByte)

The development branch of OpenWRT experimentally supports AR7 devices. OpenWRT has been successfully installed on a Fritz!Box SL. The 3070 might require a different flash memory layout.

Original memory layout:

@@ Line 18: / Line 18: @@
 ** 5 diodes: "Power", "LAN", "WLAN", "DSL", "INFO"
-= Hardware =
+== Serial Port ==
+[http://www.wehavemorefun.de/fritzbox/Serielle_Konsole Pin layout]:<br/>
+* VCC (3.3V)<br/>
+* RX<br/>
+* TX<br/>
+* GND
+The 3.3 Volt pin is the one next to the Atheros miniPCI card. Speed is 38400 bits per second.
+= Chips =
 ''The enclosure can be opened by pressing the brackets with a slotted screwdriver '''towards''' the device.''
@@ Line 34: / Line 45: @@
 WiFi Card: [http://www.ti.com/litv/pdf/splt139a Texas Instruments TNETW1130 (aka ACX111)] in MiniPCI-like slot
-== Serial Port ==
-[http://www.wehavemorefun.de/fritzbox/Serielle_Konsole Pin layout]:<br/>
-* VCC (3.3V)<br/>
-* RX<br/>
-* TX<br/>
-* GND
-The 3.3 Volt pin is the one next to the Atheros miniPCI card. Speed is 38400 bits per second.
 = Changing the Firmware =