Wireless Devices:FritzBox3070: Difference between revisions
No edit summary |
|||
| (10 intermediate revisions by the same user not shown) | |||
| Line 17: | Line 17: | ||
* Front |
* Front |
||
** 5 diodes: "Power", "LAN", "WLAN", "DSL", "INFO" |
** 5 diodes: "Power", "LAN", "WLAN", "DSL", "INFO" |
||
== Serial Port == |
|||
[http://www.wehavemorefun.de/fritzbox/Serielle_Konsole Pin layout]:<br/> |
|||
* VCC (3.3V)<br/> |
|||
* RX<br/> |
|||
* TX<br/> |
|||
* GND |
|||
The 3.3 Volt pin is the one next to the Atheros miniPCI card. Speed is 38400 bits per second. |
|||
= Chips = |
= Chips = |
||
Latest revision as of 08:58, 7 March 2007
Hardware Interfaces
- Back
- RJ-11 socket DSL
- USB-B socket
- 4 RJ-54 sockets (Ethernet 10/100 Base-T)
- USB-A socket
- Power button
- Power socket
- WLAN button
- Front
- 5 diodes: "Power", "LAN", "WLAN", "DSL", "INFO"
Serial Port
- VCC (3.3V)
- RX
- TX
- GND
The 3.3 Volt pin is the one next to the Atheros miniPCI card. Speed is 38400 bits per second.
Chips
The enclosure can be opened by pressing the brackets with a slotted screwdriver towards the device.
Broadband Chip: TNETD7300A7DW (aka AR7)
Switch Controller: Infineon ADM6996L
Ethernet Pulse Transformer: UE40ST1041AX-U LF
VLYNQ to USB Bridge: TNETV115PAP
Flash Memory: MX29LV320C (4 MByte)
SDRAM Memory: Qimonda/Infineon HYB39SC256160FE-7 (32 MByte)
WiFi Card: Texas Instruments TNETW1130 (aka ACX111) in MiniPCI-like slot
Changing the Firmware
The development branch of OpenWRT experimentally supports AR7 devices. OpenWRT has been successfully installed on a Fritz!Box SL. The 3070 might require a different flash memory layout.
Changing the memory layout
Original memory layout:
| mtd0 | 0x90000000 | 0x90000000 |
| mtd1 | 0x90010000 | 0x903c0000 |
| mtd2 | 0x90000000 | 0x90010000 |
| mtd3 | 0x903c0000 | 0x903e0000 |
| mtd4 | 0x903e0000 | 0x90400000 |
Links
Fritz!Box Wiki
OpenWRT auf Fritz!Box SL
AR7-Port von OpenWRT
OpenWRT auf Fritz!Box Fon
Speicherlayout Fritz!Box