MyNetgear

Hardware

• eth0 MAC address 00:0F:B5:3D:5D:FC

Defaults (as deliverded)

CFE> printenv
Variable Name        Value
-------------------- --------------------------------------------------
BOOT_CONSOLE         uart1
boardtype            bcm95365r
et0mdcport           0
et0phyaddr           254
configvlan           0x1
et0macaddr           00-0f-b5-3d-5d-fc
et1macaddr           00-0f-b5-3d-5d-fd
STARTUP              ifconfig eth0 -addr=192.168.0.110 -mask=255.255.255.0;boot -z -elf -tftp 192.168.0.5:vmlinux.gz;boot -elf flash0.os:
kernel_args          kernel_args console=ttyS1,115200 root=/dev/ram0 init=linuxrc rw syst_size=8M
CFE_VERSION          1.0.34
CFE_BOARDNAME        BCM95365R
CFE_MEMORYSIZE       32
*** command status = 0

CFE

To restore the netgear image run in CFE:

• ifconfig -auto eth0
• flash -noheader 192.168.0.5:netgear.img.1 flash0.os
• flash -noheader 192.168.0.5:netgear.img.2 -offset=3932160 flash0.os

"The CFE flash routine will only download and flash a maximum of 4194304 bytes (4MB) at a time. To get around the 4MB limit, we need to split the image into smaller chunks and then use the -offset flag to flash the two parts." [1]